00 2 480 Measurement stand with clamp

WARNING: This page does not describe the selected car, but rather 12 other vehicles, including the 2007 BMW 530xi, 2007 BMW 530i, 2007 BMW 525xi, 2007 BMW 525i, and 2006 BMW 530xi. However, it is still accessible from the selected car via links, so may be relevant.

Engine: M10, M20, M20B25, M20B27, M21, M30, M30B34, M30Tur, M40, M41, M42, M43, M43TU, M44, M47, M47TU, M50, M51, M52, M52TU, M54, M56, M57, M57D25, M57D30, M57TU, M60, M62, M62VAN, M67, M70, M73, M88, N40, N42, N62, N73, S14, S38, S50B30, S50B32, S50US, S52US, S54, S62, W10, W11, W17

SI number: 1 18 99(489)

Order number: 00 2 480

Measurement stand with clamp

Fig 1: Identifying Measurement Stand With Clamp

Courtesy of BMW OF NORTH AMERICA, INC.

Consisting of:

1 = 00 2 481 Clamping foot

2 = 00 2 482 Clamping piece

3 = 00 2 483 Shaft

4 = 00 2 484 Shaft