Power Supply
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 BMW 530i, 2006 BMW 525i, 2006 BMW 330xi, 2006 BMW 330i, and 2006 BMW 330Ci. However, it is still accessible from the selected car via links, so may be relevant.
The Active Steering must be initialised again after the battery has been disconnected. To do this, proceed as follows:
- Start the engine (the "Active Steering inactive" Check-Control message appears).
- Turn the steering wheel first as far as it will go anticlockwise and then as far as it will go clockwise.
- Alternatively the vehicle can be driven at about 30 to 40 km/h.
- Turn off the engine and switch off terminal 15.
- Start the engine.
- The Active Steering and all its functions is now available.
- Delete the Active Steering fault memory.