Commissioning the Active Steering
WARNING: This page does not describe the selected car, but rather 15 other vehicles, including the 2006 BMW 530i, 2006 BMW 525i, 2006 BMW 330xi, 2006 BMW 330i, and 2006 BMW 330Ci. However, it is still accessible from the selected car via links, so may be relevant.
There is a service function available in the BMW diagnosis system for commissioning or adjusting the Active Steering. The service function can be found by means of the following path: Service functions -> Suspension -> Active Steering.
Commissioning is necessary for or after the following work:
- Wheel alignment
- Work on the steering column
- Exchange or programming of AL control unit
- E60, E61, E63, E64 - Exchange or programming of steering column switch cluster (SZL)
- E90; E91: Exchange of steering column switch cluster (SZL)
- Exchange or programming of Dynamic Stability Control (DSC)
- Steering box exchange
NOTE:
Reasons for wheel alignment:
- No fault memory entry in AL control unit despite inclination of steering wheel.
- Fault memory entry present and troubleshooting concluded with result "Check wheel alignment".
- Repair measures performed making wheel alignment necessary.