LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 67 (Air Bag Restraint Systems) >> Removal & Installation >> Seat Belt PRETENSIONERS (Emergency TENSIONING Retractor) >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM . Remove front seat. See FRONT SEATS .
  2. Disconnect seat belt pretensioner connector from under seat harness connector. Disconnect seat belt buckle switch connector. Remove seat belt pretensioner mounting bolt. Remove seat belt pretensioner.
  3. To install, reverse removal procedure. Tighten seat belt pretensioner mounting bolt to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
scientia non olet · About LEMON Manuals