11 24 Connecting Rods & Bearings
WARNING: This page is about a different car, the 2005 BMW 530i, 2005 BMW 525i, 2004 BMW 530i, and 2004 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
CONNECTING RODS & BEARINGS SPECIFICATION
| Application | Type | Thread | Tightening Instructions | Measure |
|---|---|---|---|---|
| 1AZ Connecting rod bolts | M10/M30 | Replace, wash & oil screws | 55 N.m | |
| M20/M21/M40/M41/M42/M43/M43TU/M44/M47/M47TU/M50/M51/M52/M52TU/M54/M56/M57/M57TU/S52/S50 US/M70/S70/M73/N40/N42/N45/N46/N62/N73/N62S | Replace, wash & oil screws | |||
| Application torque | 5N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 70° | |||
| M60/M62 | Replace, wash & oil screws | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 80° | |||
| M67 | Replace screws, do not wash off screw coating | |||
| Application torque | 5 N.m | |||
| Jointing torque | 20 N.m | |||
| Torque angle | 85° |