LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Air Bag Restraint Systems) >> Removal & Installation >> Steering Wheel >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2001 BMW M5, 2001 BMW 540i, 2001 BMW 530i, and 2001 BMW 525i. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, see AIR BAG SAFETY PRECAUTIONS . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .
  2. Remove driver-side air bag module. See DRIVER-SIDE AIR BAG MODULE . Ensure front wheels are in straight-ahead position. Remove steering wheel retaining bolt or nut. Mark steering wheel hub in relation to steering shaft for installation reference. Remove steering wheel.
  3. To install, reverse removal procedure. Be sure steering wheel retaining pins snap into recesses. Tighten steering wheel retaining bolt or nut to specification. See TORQUE SPECIFICATIONS . Activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM .