21 2 140 Clutch centering mandrel (2 x)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
NOTE:
Note: For centering clutch disc on flywheel while installing self-adjusting clutch (SAC) - Phase-in of SAC in E46, 09/97
Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z, S6S 420G, S6S 560G
Storage location: C5
SI number: 1 13 96 (104)
Order number: 21 2 140
Clutch centering mandrel (2 x)
Consisting of:
1 = 21 2 141 Clutch centering tool
NOTE:
With M10 screw - Transmission: S6S 420G, S6S 560G
2 = 21 2 142 Clutch centering tool
NOTE:
With M10 screw - Transmission: S5D 200G, S5D 250G, S5D 260Z, S5D 310Z