11 3 160 Holder with feeler gauges
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.
Minimum set: Mechanical tools
SPECIAL TOOL
| Note: | For adjusting valves |
| Engine: | M88, S14, S38, S54 |
| Storage | location: B30, C30 |
| Order number: | 11 3 160 |
| Holder with feeler gauges | |
| Consisting of: | |
| 1 = 11 3 161 | Support bracket |
| 2 = 11 3 162 | Feeler gauges (5) |
|
NOTE:
0.25 / 0.30 / 0.35 / 0.40 / 0.45 mm
|
|
| 3 = 11 3 163 | Feeler gauges (2) |
|
NOTE:
0.15 / 0.20 mm - engine: S54
|