LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Engine - Repair (M54)) >> V-Ribbed Belt >> 11 28 050 Replacing A/C compressor drive belt (M52 / S52 / M52TU / M54 / M56) >> Model with mechanical drive belt and tension jack:

Model with mechanical drive belt and tension jack:

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW X5, 2006 BMW X3, 2005 BMW X5, 2005 BMW X3, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Press back drive belt tensioner at hexagon head or Torx socket and remove drive belt.

Fig 1: Removing Drive Belt
G03310335Courtesy of BMW OF NORTH AMERICA, INC.
IMPORTANT: Drive belt must be replaced if fouled with hydraulic fluid.

Installation: 

Check drive belt for coolant and oil residues, replace if necessary.

Install drive belt, make sure it is correctly positioned on belt pulleys.

scientia non olet · About LEMON Manuals