LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 650 (Engine - Repair (M54)) >> Crank Shaft With Bearing >> 11 21 571 Replacing grooved ball bearing in crankshaft (M52 / S52 / M52TU / M54 / S50 / S54) >> Version with grooved ball bearing:

Version with grooved ball bearing:

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW X5, 2006 BMW X3, 2005 BMW X5, 2005 BMW X3, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove guide bearing with special tool 11 2 340.

Fig 1: Removing Guide Bearing With Special Tool
G03310276Courtesy of BMW OF NORTH AMERICA, INC.

Install new thrust bearing and drive firmly home with special tool 11 2 350 in conjunction with special tool 00 5 500.

Fig 2: Installing Thrust Bearing
G03310277Courtesy of BMW OF NORTH AMERICA, INC.
scientia non olet · About LEMON Manuals