11 31 001 Replacing camshaft (M52TU / M54 / M56): Notes

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW X5, 2006 BMW X3, 2005 BMW X5, 2005 BMW X3, and 2004 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Special tools required:

00 9 250
11 2 300
11 3 240
11 3 244
11 3 250
11 3 260
11 3 292
11 4 220
11 6 150
11 6 180

(if necessary inlet or exhaust side)

The inlet or exhaust camshaft can be replaced in the vehicle.

IMPORTANT: Incorrect assembly/removal without special tools exposes the camshaft to the risk of preliminary damage or breakage. The valves may also be bent by contact with the piston crown. Comply without fail with the job instructions, recommended special tools and work sequence.