17 00 Coolant
WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.
COOLANT - TIGHTENING TORQUE SPECIFICATIONS
| Application | Type | Measure |
|---|---|---|
| 1AZ Coolant hoses 32 ... 48 mm dia. | All | 2.5 Nm |
| 2AZ Bleeder screw (8 mm wrench size) on thermostat housing | All, without E46 | 8 Nm |
| Plastic vent screws on coolant lines | E46 | 2 -0.5/+1 Nm |
| 3AZ Level switch (30 mm wrench size) to coolant expansion tank | All | 3 Nm |