11 21 Crankshaft and Bearings
WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS - TIGHTENING TORQUE SPECIFICATIONS
| Application | Type | Thread | Tightening Specification | Measure |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 Nm | |||
| Torque angle | 45 ° | |||
| Increment wheel on crankshaft | All others | M5 10.9 | Replace screws | 13 Nm |
| Increment wheel on crankshaft | All others | M5 8.8 | Replace screws | 5.5 Nm |