LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 60 (Brakes - Repair) >> Removal & Installation >> Brake Discs >> Installation

Brake Discs: Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2006 BMW X5, 2005 BMW X5, 2004 BMW X5, 2003 BMW X5, and 2002 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: Internally ventilated brake discs are balanced. Never remove or reposition balance clips.
  1. Thoroughly clean contact surface of brake disc at wheel hub. Remove traces of corrosion if necessary. Unevenness on contact surface may result in distortion of brake disc.
  2. Install brake disc and tighten bolts to specification. See TORQUE SPECIFICATIONS .
  3. If removed, install brake pads.
  4. Check that brake hose has not been disconnected. If disconnected make sure it is positively attached.
  5. Replace caliper and tighten screws to specification. See TORQUE SPECIFICATIONS .
  6. Install wheels and bleed brakes if brake hose was disconnected.
  7. If work was on rear brakes, adjust parking brake. See PARKING BRAKE  under ADJUSTMENTS.
scientia non olet · About LEMON Manuals