11 21 Crankshaft And Bearings N62
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2006 BMW 760i, 2006 BMW 760Li, 2005 BMW 760i, 2005 BMW 760Li, and 2004 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS N62 SPECIFICATIONS
| Ground sizes of main bearing journals | Bearing point 1 | |
| Standard yellow | mm | 69.974 +0.006 |
| Standard green | mm | 69.967 +0.006 |
| Original violet | mm | 69.961 +0.005 |
| Undersize 1 (U 0.25) yellow | mm | 69.724 +0.006 |
| Undersize 1 (U 0.25) green | mm | 69.717 +0.006 |
| Stage 1 (U 0.25) violet | mm | 69.711 +0.005 |
| Undersize 2 (U 0.50) yellow | mm | 69.474 +0.006 |
| Undersize 2 (U 0.50) green | mm | 69.467 +0.006 |
| Stage 2 (U 0.50) violet | mm | 69.461 +0.005 |
| Crankshaft bearing clearance, radial | mm | 0.024-0.052 |
| Maximum permitted runout on central crankshaft journal (crankshaft supported at bearing journals 1 and 5). | mm | 0.15 |
CRANKSHAFT AND BEARINGS N62 SPECIFICATIONS
| Grinding stages, crankshaft guide bearing | ||
| Standard | mm | 28.0 F8 |
| Size 1 | mm | 28.2 F8 |
| Size 2 | mm | 28.4 F8 |
| Crankshaft axial play | mm | 0.080-0.246 |