11 21 Crankshaft and Bearings
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
CRANKSHAFT AND BEARINGS TIGHTENING TORQUE SPECIFICATIONS (1AZ)
| Type | Thread | Tightening specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 N.m. | |||
| Torque angle | 45° | |||
| Increment wheel on crankshaft | M5 10.9 | Replace screws | 13 N.m. | |
| Increment wheel on crankshaft | M5 8.8 | Replace screws | 5.5 N.m. |