11 11 Engine Block, Cylinder Crankcase M54 B 30
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
ENGINE BLOCK CYLINDER CRANKCASE M54 B 30 SPECIFICATIONS
| Bore hole diameter(1) | mm | 84.000+0.010 | ||
| 1. Interference (1) (only permitted for aluminum engine block with cast iron liners) | mm | 84.250+0.010 | ||
| Permitted out-of-round of cylinder bore (1) | mm | 0.005 | ||
| Permitted conicity of cylinder bore (1) | mm | 0.010 | ||
| Permissible total wear tolerance between piston and cylinder (engine operated) | mm | 0.15 | ||
|
||||