11 12 Cylinder Head with Cover M54
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER M54 SPECIFICATIONS
| Cylinder head height: Original dimension | mm | 140.0 |
| Machining limit, refer to 11 12 719 RESURFACING CYLINDER HEAD SEALING SURFACE (M52 / M52TU / M54 / M56) . | mm | 139.7 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of valve guide (installed) | ||
| Standard | mm | 6.0 H7 |
| Size 1 | mm | 6.1 H7 |
| Size 2 | mm | 6.2 H7 |
| Max. permissible tilt clearance (between valve and valve guide) | mm | 0.5 |
| Bearing of camshaft | ||
| Pilot bearing (1) width | mm | 20 d8 |