LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 541 (General Electrical System - Repair Instructions - X5 (3.0L)) >> Switch >> 61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking

61 31 079 Removing and installing/replacing switch for hazard warning flashers/central locking

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

Remove finisher for preselector lever. Refer to 51 16 210 REMOVING AND INSTALLING/REPLACING TRIM FOR PRESELECTOR KNOB .

Press out switch for hazard warning flashers/central locking (1) through opening for preselector lever finisher.

Disconnect plug.

Fig 1: Removing Switch For Hazard Warning Flashers/Central Locking
G03256532Courtesy of BMW OF NORTH AMERICA, INC.