61 71 061 Replacing fluid tank for windshield washer system

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Drain fluid tank for windshield washer system.

Unscrew nuts (1).

Fig 1: Unscrewing Nuts

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Feed lug (1) into tab.

Press fluid tank for windshield washer system downwards until it is heard snapping into place.

Fig 2: Feeding Lug Into Tab

Courtesy of BMW OF NORTH AMERICA, INC.

Disconnect plug connections (1).

Unlock hose (2) and detach.

Raise fluid tank for windshield washer system.

Detach hoses (3) and lift out fluid tank for windshield washer system.

Fig 3: Locating Plug Connections

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Make sure hoses are laid without kinks.

Fill fluid tank for windshield washer system.

Pull washer pumps (1) vertically upwards and remove.

Fig 4: Pulling Washer Pumps Vertically Upwards And Removing

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Coat sealing rings of washer pump with anti-friction agent.

Replace sealing rings/strainers on washer pumps.

Turn level switch (2) approx. 90° in direction of arrow and pull out.

Remove cap and strainer for fluid tank of windshield washer system.