61 62 110 Removing and installing / replacing spray nozzle for rear window washer unit

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.

NOTE:

For Special Tool identification, see SPECIAL TOOLS - X-5 (3.0i) .

Special Tools Required:

00 9 317

Lever spray nozzle for rear window washer system (1) with special tool 00 9 317 out of spray nozzle holder (2).

Fig 1: Removing Spray Nozzle From Spray Nozzle Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Installation:

Insert lug (2) of spray nozzle for rear window washer system (1) into groove of spray nozzle holder.

Fig 2: Inserting Lug Of Spray Nozzle Into Groove Of Holder

Courtesy of BMW OF NORTH AMERICA, INC.

Replacement Only:

Adjusting spray nozzle on rear window washer unit. Refer to 61 62 100 ADJUSTING JET NOZZLE FOR REAR WINDOW WASHER UNIT .