LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Disc - Z8) >> Testing >> Hydraulic System >> High Pressure Leak Test

High Pressure Leak Test

WARNING: This page is about a different car, the 2003 BMW Z8 and 2002 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Check brake system for proper operation and leaks. Remove front wheel and caliper bleeder screw. Attach Pressure Tester (32-4-000) to one side of brake circuit.
  2. With engine off, apply about 150 lbs. (67 kg) of pressure to brake pedal.
  3. Hydraulic line pressure should increase to 710 psi (50 kg/cm2 ). After 2 minutes, pressure should not drop more than 57 psi (4 kg/cm2 ). Repeat test on other side of brake circuit.
scientia non olet · About LEMON Manuals