LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 54 (Disc - Z8) >> Overhaul >> Master Cylinder >> Reassembly

Master Cylinder: Reassembly

WARNING: This page is about a different car, the 2003 BMW Z8 and 2002 BMW Z8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Reassemble piston assemblies using thin coating of brake assembly lubricant. Install piston assemblies into cylinder bore, using Guide Sleeve (34-3-000) to prevent seal damage.
  2. Push piston fully forward and install plug. Install retaining ring in master cylinder bore. Replace "O" ring between master cylinder and brake booster. Bench bleed master cylinder before installation.
scientia non olet · About LEMON Manuals