51 13 065 Removing and installing or replacing finisher on left or right headlight housing
WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Open hood.
Unclip clip (2) on trim (1) on inside.
Press trim (1) downwards out of holder.
Feed trim (1) out of hook (3) and remove.
Installation:
Mount (2) and hooks (3) and (4) of trim (1) must not be damaged.
Seal (5) must be correctly seated.