LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 536 (EXHAUST SYSTEM - REPAIR INSTRUCTIONS - X5 (3.0i)) >> Exhaust System, Complete >> 18 21 051 Replacing all exhaust suspensions (M62, M54)

18 21 051 Replacing all exhaust suspensions (M62, M54)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For Special Tool identification, see SPECIAL TOOLS - X5 (3.0i) .

Special Tools Required: 

WARNING: Scalding hazard! Only perform these tasks after exhaust system has cooled down.
NOTE: Rubber mounts are colored differently.

Mixing up the rubber mounts will alter the vibration response of the exhaust system.

Support exhaust system at intermediate muffler with special tool 31 2 220.

Fig 1: Supporting Exhaust System Using Support Plate
G03255457Courtesy of BMW OF NORTH AMERICA, INC.

Clip cover (1) out of retainers (2).

Fig 2: Removing Retainer Cover
G03255458Courtesy of BMW OF NORTH AMERICA, INC.

Press cover (1) downwards.

Release screws (2) on rubber mount for rear muffler on left and right.

Fig 3: Releasing Screws On Rubber Mount For Rear Muffler On Left And Right
G03255459Courtesy of BMW OF NORTH AMERICA, INC.

Detach rubber mount (1) from holder (2).

Fig 4: Detaching Rubber Mount From Holder
G03255460Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) on rubber mount for rear muffler on rear axle carrier on left and right.

Detach rubber mount from holder.

Replace rubber mounts on rear muffler.

NOTE: Rubber mount for rear muffler on rear axle carrier is red.

Mixing up the rubber mounts will alter the vibration response of the exhaust system.

Fig 5: Releasing Screws On Rubber Mount For Rear Muffler
G03255461Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (1) of rubber mounts for intermediate muffler.

Detach rubber mount from holder.

Replace rubber mounts on intermediate muffler.

Fig 6: Releasing Screws Of Rubber Mounts For Intermediate Muffler
G03255462Courtesy of BMW OF NORTH AMERICA, INC.

Release screws (3) on rubber mount.

Detach rubber mount from holder.

Replace rubber mounts on exhaust pipe.

Fig 7: Releasing Screws On Rubber Mount
G03255463Courtesy of BMW OF NORTH AMERICA, INC.