LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 535 (COOLING SYSTEM - REPAIR INSTRUCTIONS - X5 (3.0i)) >> Oil Cooler >> 17 21 500 Flushing oil cooler with lines (automatic transmission)

17 21 500 Flushing oil cooler with lines (automatic transmission)

WARNING: This page is about a different car, the 2003 BMW X5, 2002 BMW X5, and 2001 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:

For Special Tool identification, see SPECIAL TOOLS - X5 (3.0i) .

Special Tools Required: 

NOTE: Carry out the work steps listed when: Fitting a new or replacement transmission. Flushing can only be carried out with the automatic transmission removed.

Procedure: 

Automatic transmission removed.

Connect appropriate adapters to oil lines exiting from automatic transmission.

Connect the connecting line 17 2 019 from the oil collection unit with the quick-release coupling.

Connect drain line 17 2 018 using quick-release coupling.

Feed open end of drain line into a suitable collection container.

Using oil collection unit, flush approx. 1 liter of transmission fluid through oil lines and oil cooler. Refer to BMW SERVICE OPERATING FLUIDS .

Reposition quick-release couplings.

Flush oil lines/oil cooler in opposite direction with approx. 1 liter of transmission fluid. Refer to BMW SERVICE OPERATING FLUIDS .

Disconnect quick-release couplings, remove adapters.

NOTE: Dispose of flushing oil properly; do not under any circumstances reuse it.

Arrangement Of Flushing Device For Transmissions A5S 310Z, A5S 560Z, A5S 360R/390R, A4S 200R, A5S 325Z, GA6HP26Z: 

Fig 1: Identifying Arrangement Of Flushing Device For Transmissions A5S 310Z, A5S 560Z, A5S 360R/390R, A4S 200R, A5S, GA6HP26Z
G03255419Courtesy of BMW OF NORTH AMERICA, INC.
  1. Transmission-oil cooler with lines.
  2. Oil collection unit.
  3. Oil drip tray.

17 2 011 Adapter for connecting transmission-side oil cooler lines (1).

17 2 015 Connection for oil collection unit (2), manufacturer: Deutsche Tecalemit or,

17 2 016 Connection for oil collection unit (2), manufacturer: Horn.

17 2 017 Quick-release coupling (2 pieces).

17 2 018 Hose to oil drip tray (3).

17 2 019 Hose to oil collection unit (2).

17 2 021 Mounting plate for adapter 17 2 011 for transmissions A5S 325Z, GA6HP26Z.

Arrangement Of Flushing Device For Transmission A4S 310R: 

Fig 2: Identifying Arrangement Of Flushing Device For Transmission A5S 310R
G03255420Courtesy of BMW OF NORTH AMERICA, INC.
  1. Transmission-oil cooler with lines.
  2. Oil collection unit.
  3. Oil drip tray.

17 2 012 Adapters (2 x) for connecting transmission-side oil cooler lines (1).

17 2 015 Connection for oil collection unit (2), manufacturer: Deutsche Tecalemit or,

17 2 016 Connection for oil collection unit (2), manufacturer: Horn.

17 2 017 Quick-release coupling (2 pieces).

17 2 018 Hose to oil drip tray (3).

17 2 019 Hose to oil collection unit (2).

Arrangement Of Flushing Device For Transmission A4S 300J: 

Fig 3: Identifying Arrangement Of Flushing Device For Transmission A4S 300J
G03255421Courtesy of BMW OF NORTH AMERICA, INC.
  1. Transmission-oil cooler with lines.
  2. Oil collection unit.
  3. Oil drip tray.

17 2 012 Adapters (2 x) for connecting transmission-side oil cooler lines (1).

17 2 014 Banjo bolt for connecting transmission-side oil cooler lines (1).

17 2 015 Connection for oil collection unit (2), manufacturer: Deutsche Tecalemit or,

17 2 016 Connection for oil collection unit (2), manufacturer: Horn.

17 2 017 Quick-release coupling (2 pieces).

17 2 018 Hose to oil drip tray (3).

17 2 019 Hose to oil collection unit (2).

Arrangement Of Flushing Device For Transmission A5S 440Z: 

Fig 4: Identifying Arrangement Of Flushing Device For Transmission A4S 440Z
G03255422Courtesy of BMW OF NORTH AMERICA, INC.
  1. Transmission-oil cooler with lines.
  2. Oil collection unit.
  3. Oil drip tray.

17 2 012 Adapters (2 x) for connecting transmission-side oil cooler lines (1).

17 2 013 Banjo bolt for connecting transmission-side oil cooler lines (1).

17 2 015 Connection for oil collection unit (2), manufacturer: Deutsche Tecalemit or,

17 2 016 Connection for oil collection unit (2), manufacturer: Horn.

17 2 017 Quick-release coupling (2 pieces).

17 2 018 Hose to oil drip tray (3).

17 2 019 Hose to oil collection unit (2).