11 21 Crankshaft and Bearings
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - CRANKSHAFT AND BEARINGS (1AZ)
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| 1AZ Increment wheel on crankshaft | S54 | M5 10.9 | Replace screws | |
| Jointing torque | 5.0 N.m. | |||
| Torque angle | 45° | |||
| Increment wheel on crankshaft | All others | M5 10.9 | Replace screws | 13 N.m. |
| Increment wheel on crankshaft | All others | M5 8.8 | Replace screws | 5.5 N.m. |