00 00 M8 and M8 x 1 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - M8 AND M8 X 1 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 . | Surface colour / (surface coating) | |||
| M8 thread | yellow (ZN) | M8 8.8 | 24 N.m. | |
| silver (ZNS) | M8 8.8 | 19 N.m. | ||
| yellow (ZN) | M8 10.9 | 34 N.m. | ||
| silver (ZNS) | M8 10.9 | 28 N.m. | ||
| yellow (ZN) | M8 12.9 | 40 N.m. | ||
| silver (ZNS) | M8 12.9 | 32 N.m. | ||
| M8x1 thread | yellow (ZN) | M8 x 1 8.8 | 26 N.m. | |
| silver (ZNS) | M8 x 1 8.8 | 21 N.m. | ||
| yellow (ZN) | M8 x 1 10.9 | 36 N.m. | ||
| silver (ZNS) | M8 x 1 10.9 | 30 N.m. | ||
| yellow (ZN) | M8 x 1 12.9 | 44 N.m. | ||
| silver (ZNS) | M8 x 1 12.9 | 33 N.m. |