00 00 M12 and M12x1.5 - maximum tightening torques acc. to BMW GS 90003-2
WARNING: This page is about a different car, the 2005 BMW 545i and 2004 BMW 545i. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUES SPECIFICATIONS - M12 AND M12X1.5 - MAXIMUM TIGHTENING TORQUES ACC. TO BMW GS 90003-2
| Type | Thread | Tightening Specification | Measure | |
|---|---|---|---|---|
| Scope of applicability of tightening torques, refer to EXCERPT FROM COMPANY STANDARD BMW GS 90003-2 . | Surface colour / (surface coating) | |||
| M12 thread | yellow (ZN) | M12 8.8 | 82 N.m. | |
| silver (ZNS) | M12 8.8 | 66 N.m. | ||
| yellow (ZN) | M12 10.9 | 115 N.m. | ||
| silver (ZNS) | M12 10.9 | 98 N.m. | ||
| yellow (ZN) | M12 12.9 | 140 N.m. | ||
| silver (ZNS) | M12 12.9 | 108 N.m. | ||
| M12x1.5 thread | yellow (ZN) | M12 x 1.5 8.8 | 87 N.m. | |
| silver (ZNS) | M12 x 1.5 8.8 | 68 N.m. | ||
| yellow (ZN) | M12 x 1.5 10.9 | 123 N.m. | ||
| silver (ZNS) | M12 x 1.5 10.9 | 100 N.m. | ||
| yellow (ZN) | M12 x 1.5 12.9 | 147 N.m. | ||
| silver (ZNS) | M12 x 1.5 12.9 | 110 N.m. |