LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Front Suspension - Repair - E36) >> Adjustments >> Ride Height (From 9/93) >> Z3

Ride Height (From 9/93): Z3

WARNING: This page does not describe the selected car, but rather 61 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open hood. Insert Measuring Tool (31-3-010) in bore in wheel arch. Measure distance "A" from bottom center flange of wheel rim (2) to Measuring Tool (1). See Fig 1 .
  2. Ride height measurement must be within .04" (10 mm) of each side. For proper ride height, see RIDE HEIGHT SPECIFICATIONS (FROM 9/93 - Z3)  .
  3. Identify installed spring. Installed spring is identified by referring to parts microfiche, contacting BMW Parts Dept. or by removing spring and finding BMW number on end of spring. Springs are allocated by vehicle type and, where applicable, by special equipment such as air conditioning, sports suspension, etc. and by date of production launch.
  4. Replace both springs, even though only one may be defective, to bring ride height back to specification.
Fig 1: Measuring Ride Height
G00079041Courtesy of BMW OF NORTH AMERICA, INC.
RIDE HEIGHT SPECIFICATIONS (FROM 9/93 - Z3)

Application In. (mm)
Z3 Coupe
15" Rim 25.28 (642)
16" Rim 25.80 (655)
17" Rim 26.38 (670)
Z3 Roadster
Standard Suspension
15" Rim 25.47 (647)
16" Rim 25.98 (660)
17" Rim 26.57 (675)
Sports Suspension
15" Rim 24.88 (632)
16" Rim 25.40 (645)
17" Rim 25.98 (660)
Z3 Sedan
Standard Suspension
15" Rim 22.25 (565)
16" Rim 22.75 (578)
17" Rim 23.35 (593)
Sports Suspension
15" Rim 21.65 (550)
16" Rim 22.17 (563)
17" Rim 22.75 (578)