LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 50 (Front Suspension - Repair - E36) >> Adjustments >> Ride Height (From 9/93) >> Except Z3

Except Z3

WARNING: This page does not describe the selected car, but rather 61 other vehicles, including the 2002 BMW Z3, 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW Z3, and 2001 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.
  1. Measure actual ride-level height from wheel-house lower edge to rim flange at height of wheel center. Determine average value of each wheel after lifting and lowering vehicle body and then average value of axle from these values.
  2. Ride height measurement must be within .04" (10 mm) of each side. For proper ride height, see RIDE HEIGHT SPECIFICATIONS (FROM 9/93 - EXCEPT Z3)  .
  3. Identify installed spring. Installed spring is identified by referring to parts microfiche, contacting BMW Parts Dept. or by removing spring and finding BMW number on end of spring. Springs are allocated by vehicle type and, where applicable, by special equipment such as air conditioning, sports suspension, etc. and by date of production launch.
  4. Replace both springs, even though only one may be defective, to bring ride height back to specification.
RIDE HEIGHT SPECIFICATIONS (FROM 9/93 - EXCEPT Z3)

Application In. (mm)
Standard Suspension
15" Rim 20.4 (518)
16" Rim 20.9 (531)
17" Rim 21.5 (546)
M Roadster 23.1 (588)
M3 23 (585)
M Coupe 26.1 (664)
Sports Suspension
15" Rim 19.9 (507)
16" Rim 20.5 (520)
17" Rim 21 (535)
Rough Road Package
15" Rim 21.2 (538)
16" Rim 21.7 (551)
17" Rim 22.3 (566)