00 00 ... Front and (if necessary) rear disk brake linings: remove and install, check total thickness. Clean brake shafts. If necessary, replace linings. Brake disks: Check surface and thickness. Grease wheel centering mount on alloy wheels
WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.
Remove front and (if necessary) rear disk brake linings. For further information on how to proceed, refer to:
- Removing and installing front disc brake linings. Refer to DISC PAD .
- Removing and installing rear disc brake linings. Refer to DISC PAD .
NOTE:
Clean brake shafts.
Replace brake linings if:
- Linings drop below minimum thickness (refer to THICKNESS OF BRAKE LINING ).
Replace brake discs if:
- Discs drop below minimum thickness (refer to DISC BRAKE SPECIFICATIONS ).
- Presence of:
- Scoring.
- Heat cracks.
- Lateral runout.
- Thickness difference.
CAUTION:
After completing tasks, press brake pedal several times so that brake linings rest against brake discs.