00 .. ... Symbols used and information in repair instructions

WARNING: This page is about a different car, the 2002 BMW Z3 and 2001 BMW Z3. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Precautionary rules and measures which protect mechanics and other personnel against injury (including life-threatening injuries).

Example:

WARNING: Danger of scalding! Only perform this work after engine has cooled down.

Important!

Specific instructions and precautionary measures which prevent damage to the vehicle or to vehicle parts. Failure to comply with the above will invalidate any warranty claims.

The caution symbol is used in all repair instructions.

However, use of the warning word "Caution!" is not binding in every case.

The notes, instructions and precautionary measures mentioned above retain their validity.

Recycling:

Observe country-specific waste-disposal regulations.

General Information:

Refers to other instructions: e.g.:

Further instructions: refer to operating instructions for tire balancing machine.

Replacement:

Carry out programming/coding.

NOTE: Many electronic control units must be programmed/coded (e.g. when replaced).

NOTE:

Connect BMW diagnosis system.

Important!

Read and comply with notes on protection against electrostatic damage (ESD protection).

NOTE: Electronic control units and other electronic components - if handled incorrectly - can be damaged or destroyed by electrostatic discharge.