LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 436 (Lights - Service Information) >> Adaptive Headlights E60, E61, E63, E64, E65, E66, E90 >> Brief Description Of Components >> AHL: Adaptive Headlights >> Construction >> Pin Assignment

Pin Assignment

WARNING: This page does not describe the selected car, but rather 46 other vehicles, including the 2008 BMW M5, 2008 BMW 650i, 2007 BMW Z4, 2007 BMW M6, and 2007 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
PIN ASSIGNMENT FOR AHL CONNECTOR X150513, 18-PIN

Pin Type Description
1 V AHL control unit supply voltage
2 A Supply voltage switched for the left stepper motor controller (SMC)
3 A Supply voltage switched for SMC, right
4 M Earth
5 M Earth for automatic headlight-range adjustment, front right ride-height sensor
6 M Earth for automatic headlight-range adjustment, rear right ride-height sensor
7 E Terminal 15 wake-up wire
8 E Input from automatic headlight-range adjustment, rear right ride-height sensor
9 E Input from automatic headlight-range adjustment, front right ride-height sensor
10 E Input from brake-light switch
11 - -
12 - Diagnosis wire (only for E46, E53, E83; not assigned for E60, E61, E63, E64)
13 E/A PT-CAN High
14 E/A PT-CAN Low
15 A Supply voltage for automatic headlight-range adjustment, front right ride-height sensor
16 A Supply voltage for automatic headlight-range adjustment, rear right ride-height sensor
17 E/A LIN bus to stepper motor controller (SMC) in left-hand headlight
18 E/A LIN bus to SMC in right-hand headlight
  A = Output
E = Input
E/A = Input/output
M = Earth
V = Supply voltage
For details of current pin assignment, please refer to BMW diagnosis system.