With Terminal R On Or Terminal 15 On:
WARNING: This page is about a different car, the 2005 BMW 645Ci and 2004 BMW 645Ci. However, it is still accessible from the selected car via links, so may be relevant.
Press the reset button in the instrument cluster for 10 seconds to reset the test functions. The test functions can be scrolled through with the reset button in the instrument cluster.
An alternative means of accessing the test functions is: hold down the reset button in the instrument cluster and simultaneously switch terminal R ON.
NOTE:
Disabling and enabling the test functions
Only the first two test functions are freely accessible. The test functions are disabled from No. 3 onward. They can be enabled only in test function No. 19. The test functions are enabled by: entering the sum obtained by adding together the last five digits of the VIN.
INSTRUMENT CLUSTER DIAGNOSIS
| Test function | Reading in LCD display | Description |
|---|---|---|
| 01 | 01.00 FGSTNR AB12345 |
Identification, instrument cluster VIN (7 characters) |
| 01.01 | 01.01 K-ZAHL W/T W/T 47642/47741 |
K number (distance/speed) |
| 01.02 | 01.02 BMWTNR 000004112337 |
BMW Part Number |
| 01.03 | 01.03 COD DIA 0002h 06E0h |
Encoding index and diagnosis index |
| 01.04 | 01.04 KI HSTLDATUM 12.12.2002 |
Date of manufacture in day/month/year format |
| 01.05 | 01.05 HW I 0002h 0002h |
Hardware number and change index |
| 01.06 | 01.06 SW 03.02.02 |
Software index |
| 01.07 | 01.07 KODIERDATE 03.02.02 |
Encoding-data index |
| 01.08 | 01.08 CAN 255 255 255 |
CAN index |
| 02 | 02.00 KI TEST |
System test in progress LCD display, indicator and warning lights, all step motors are actuated in the test |
| 03 | 03.00 Not used |
- |
| 04 | 04.00 VERB-MOM 12,6 l/100 km |
Consumption index Current consumption in l/100 km |
| 04.01 | 04.01 VERB-MOM 22,6 l/h |
Current consumption in l/h |
| 04.02 | 04.02 D-VERB1 LIT 234,6 l |
Average consumption 1, litre counter |
| 04.03 | 04.03 D-VERB WEG 234,6 l |
Average consumption 1, distance counter |
| 04.04 | 04.04 D-VERB2 LIT 234,6 l |
Average consumption 2, litre counter |
| 04.05 | 04.05 D-VERB2 WEG 234,6 l |
Average consumption 2, distance counter |
| 05 | 05.00 RW-VERBR 12,6 l/100 km |
Range, consumption Consumption in l/100 km |
| 05.01 | 05.01 RW-MOM 456,8 km |
Range, current |
| 06 | 06.00 TANK L R S 24,5 26,7 51 |
Fuel tank contents values Fuel level sensors, left/right/sum in litres |
| 06.01 | 06.01 TANK-ANZ PHASE 51,5 l 2 |
Fuel gauge reading in litres, tank phase |
| 06.02 | 06.02 TANK-ADC L R 234h 345h |
Fuel tank contents (ADC) |
| 07 | 07.00 KTMP-MOM 104 °C |
Current readings Coolant temperature °C (reads "ungltig" (invalid) if CAN message is invalid) |
| 07.01 | 07.01 ATMP-MOM -23,5 °C |
Ambient temperature |
| 07.02 | 07.02 ATMP ADC 345h |
Ambient temperature (ADC) |
| 07.03 | 07.03 N-MOT-MOM 2678 U/min |
Engine speed in RPM (reads "ungltig" (invalid) if CAN message is invalid) |
| 07.04 | 07.04 N-VMF-MON 4500 U/min |
Engine-revolutions advance-warning field (reads "ungltig" (invalid) if CAN message is invalid) |
| 08 | 08.00 V-EFF 123 km/h |
Speed Effective speed (reads "ungltig" (invalid) if CAN message is invalid) |
| 08.01 | 08.01 V-ANZ 122 km/h |
Reading for speed (reads "ungltig" (invalid) if CAN message is invalid) |
| 08.02 | 08.02 V-SZ 140 km/h |
Speed setting, moving-disc instrument (reads "ungltig" (invalid) if CAN message is invalid) |
| 08.03 | 08.03 D-GESCH1 WEG 2434,6 km |
Average speed 1, odometer |
| 08.04 | 08.04 D-GESCH1 ZEI 1h 12m 13s |
Average speed 1, timer |
| 08.05 | 08.05 D-GESCH2 WEG 2434,6 km |
Average speed 2, odometer |
| 08.06 | 08.06 D-GESCH2 ZEI 1h 12m 13s |
Average speed 2, timer |
| 09 | 09.00 Ub 13, 3V |
System voltage On-board supply voltage, terminal 30 |
| 10 | 10.00 not used |
- (CBS data as of 09/2003) |
| 11 | 11.00 ZEIT-EINH 24h |
Units Unit of time |
| 11.01 | 11.01 WEG-EINH km km/h |
Unit of distance |
| 11.02 | 11.02 TEMP-EINH °C |
Unit of temperature |
| 11.03 | 11.03 VERB-EINH l/100 km |
Unit of fuel consumption |
| 12 | 12.00 V-ANKUNFT 67,8 km/h |
Estimated time of arrival Average speed |
| 12.01 | 12.01 ANK-ZEIT 15:13 |
Time of arrival |
| 13 | 13.00 AUDIO BLINKER |
Acoustic generator Sound once for test |
| 14 | 14.00 FSP-Eintrge 10 |
Self-diagnosis Number of entries in fault memory |
| 14.01 | 14.01 FSP01 1260h 12345678901 2 |
Read out fault-memory entries 1 to 10 |
| 15 | 15.00 PORT 00 01010111 |
Processor I/O ports Status indicator in I/O ports |
| 16 | 16.00 DIMMRAD-CAN 46h |
Dim Dimmer setting (reads "ungltig" (invalid) if CAN message is invalid) |
| 16.01 | 16.01 PHOTO-ADC 156h |
Phototransistor (ADC) |
| 16.02 | 16.02 DIMM-PWM S Z F0h F0h |
PWM output, scale and pointer |
| 16.02 | 16.02 DIMM-PWN D K F0h F0h |
PWM output, display and indicator lights |
| 17 | 17.00 DISP-HEIZ Ein iO |
Contrast Display heating status |
| 17.01 | 17.01 NTC1 NTC2 234h 245h |
NTC values |
| 17.02 | 17.02 KONTR-PWM 56h 18 |
PWM value |
| 18 | 18.00 Not used |
- |
| 19 | 19.00 LOCK LOCK: ON LOCK: 25 |
Lock, unlock Lock on/off |
| 20 | 20.00 KORR-VERBR 1000 1er KORR 10er KORR 100er KORR |
Consumption correction |
| 21 | 21.00 Reset? |
Reset (software reset) Reset instrument cluster |
The test functions are terminated by the following conditions:
- Terminal R OFF
- Reset button held down for longer than 5 seconds
- Test function 21 called
- Check-Control message received
Once the test functions have been terminated, test functions 3 to 19 are automatically disabled.