11 15 005 Removing tank ventilation line (N20)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove EXHAUST TURBOCHARGER .

Release screw (1).

Tightening torque 11 42 6AZ .

Remove oil return line (2).

Installation note:

Replace O-ring.

Remove vent line (3).

Fig 1: Identifying Oil Return Line, Vent Line And Screw

Courtesy of BMW OF NORTH AMERICA, INC.

Release retaining clip (3).

Remove vent line (2).

Installation note:

Make sure vent line (2) is in correct installation position.

Fig 2: Identifying Vent Line And Retaining Clip

Courtesy of BMW OF NORTH AMERICA, INC.

Assemble engine.