11 28 125 Removing and installing/replacing both tensioning devices for alternator drive belt (N55 Hybrid)
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 11 0 390 .
WARNING:
High-voltage hazard!
The following must be strictly observed prior to starting work :
- Observe SAFETY INFORMATION for handling hybrid cars.
Necessary preliminary work:
- Remove DRIVE BELT .
Remove special tool 11 0 390 .
Release screw (1) on belt tensioner.
Tightening torque 11 28 1AZ .
Assemble engine.