11 28 050 Replacing drive belt for air conditioning compressor (N20)
WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
- 11 0 390 .
Necessary preliminary tasks:
- Remove the CLEAN AIR PIPE to the exhaust turbocharger.
NOTE:
Mark the direction of travel of the drive belt if it is to be reused.
Turn belt tensioner (1) on the hexagon head (2) in direction of arrow until bore hole on the belt tensioner is flush with the dowel hole.
Keep the belt tensioner (1) tensioned and position with a lock pin or special tool 11 0 390 , if applicable.
Remove drive belt (3).
Assemble engine.
Installation note:
Check drive belt for correct installation position and, if reusing, observe direction of travel. Risk of damage .