LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4199 (Engine - Variable Valve Timing Control System (VANOS), Intake Plenum, Turbocharger, Water Pump, Thermostat, Coolant Lines, EGR Valve, EGR Cooler, Oxygen Sensors - Repair) >> Variable Valve Timing Control System (VANOS) >> N55 Engine >> 11 36 655 Removing and installing/replacing both solenoid valves (N55) >> 12 00 Removing and installing/replacing ignition coil cover (N55)

12 00 Removing and installing/replacing ignition coil cover (N55)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Pull ignition coil cover (1) off of rubber mounts and remove in direction of travel.

Release engine oil cooler lines from ignition coil cover if necessary.

Fig 1: Removing Ignition Coil Cover
G09873385Courtesy of BMW OF NORTH AMERICA, INC.