11 74 507 Replacing the pressure converters for turbocharger (N20)

WARNING: This page does not describe the selected car, but rather 50 other vehicles, including the 2016 BMW M5, 2016 BMW ActiveHybrid 5, 2016 BMW 550i xDrive, 2016 BMW 550i, and 2016 BMW 535i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove ACOUSTIC COVER .

Disconnect plug connection (1).

Remove vacuum line (OUT).

Unfasten screws (2).

Remove pressure converter (3).

Installation note:

If the pressure converter is replaced, the (VAC) line must be converted.

Fig 1: Identifying Vacuum Lines, Pressure Converter, Connector, And Screws

Courtesy of BMW OF NORTH AMERICA, INC.

Reassemble the vehicle.

Check function of DME.