41 00... Frame Alignment Control Body Dimensions: Notes

WARNING: This page does not describe the selected car, but rather 28 other vehicles, including the 2013 BMW 335xi, 2013 BMW 335i, 2013 BMW 328xi, 2013 BMW 328i, and 2012 BMW 335xi. However, it is still accessible from the selected car via links, so may be relevant.

Dimensions in mm.

Measurement tolerances:

≤ 1000 mm ± 1.5 mm
≥ 1000 mm ± 2.5 mm

The control points shown serve to check the body and the straightening attachment.

The specified dimensions/measurements always refer to the center point of the bore/screw.