11 15 016 Removing and installing/replacing engine ventilation connecting line

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary work:

Remove RIGHT INTAKE SILENCER HOUSING

IMPORTANT: Increased risk of line (2) breakage

Use a screwdriver (1) to unlock all the latch mechanisms one after the other.

Pull off the connection line (2) at the same time.

Fig 1: Pulling Off Connection Line

G10056130

Courtesy of BMW OF NORTH AMERICA, INC.

IMPORTANT: Increased risk of line (2) breakage

Use a screwdriver (1) to unlock all the latch mechanisms one after the other.

Pull off the connection line (2) at the same time.

Feed out the connection line (2) and remove.

Fig 2: Pulling Off Connection Line

G10056131

Courtesy of BMW OF NORTH AMERICA, INC.

Installation note:

No catches (1) are permitted to be damaged or missing.

If there is a faulty latch mechanism (1), the line must be replaced.

Fig 3: Identifying Catches

G10056132

Courtesy of BMW OF NORTH AMERICA, INC.