LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 4161 (Engine Assembly, Cylinder Head, Oil Pan, Timing Case Cover, Crankcase Ventilation System - Repair) >> Crankcase Ventilation System >> 11 15 001 Replacing all engine ventilation lines and actuating wires >> Overview of tightening torques

Overview of tightening torques

WARNING: This page does not describe the selected car, but rather 27 other vehicles, including the 2017 BMW M6, 2017 BMW 650i xDrive, 2017 BMW 650i, 2017 BMW 640i xDrive, and 2017 BMW 640i. However, it is still accessible from the selected car via links, so may be relevant.
Use in Activity: 31, 33
Connecting line on cylinder head cover 
M6 x 18 10 Nm
Use in Activity: 32
Engine wiring harness to engine 
M8 10 Nm
Use in Activity: 34
Oil filler neck on cylinder head cover 
M6 x 20 8 Nm
Use in Activity: 35, 36
Carrier plate holder on cylinder head cover 
M6 x 20 8 Nm
Use in Activity: 41
Expansion tank to body 
M6 10 Nm
Use in Activity: 42
Oil reservoir to coolant expansion tank/holder 
M6 8 Nm
Use in Activity: 42
Oil reservoir to wheel arch 
M6 x 37 10 Nm
Use in Activity: 43, 44
Clean air pie to turbocharger 
M6 10 Nm
Use in Activity: 45, 46
Charge air hose to exhaust turbocharger 
Screw clamp 3, 5 Nm
Use in Activity: 47
Electronics box, lower section to body 
  8 Nm
Use in Activity: 47
Grounding cable to ground connection 
M8 21 Nm
Use in Activity: 49
Clamp to air duct 
  3 Nm
Use in Activity: 51
Suspension cross-brace in engine compartment, front 
M10 x 25 Tightening torque  56 Nm
M10 x 47 Jointing torque  30 Nm
Replace screws Angle of rotation  90 °
Use in Activity: 54
Battery earth lead 
M6 5 Nm