22 32 050 Replacing cross-member for transmission mounting (N47)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
- Remove rear UNDERBODY PROTECTION .
- Release the heat shield.
- Support transmission with lifter.
Loosen screws and nut.
Remove transmission cross-member.
Tightening torque 22 32 3AZ/6AZ .