11 41 Oil pump with strainer and motor
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
TIGHTENING TORQUE SPECIFICATIONS - OIL PUMP WITH STRAINER AND MOTOR
| Type | Thread | Tightening specifications | Dimension | ||
|---|---|---|---|---|---|
| 1AZ | Intake pipe on oil pump housing | N20/N26 | M6 | 10 Nm | |
| 2AZ | Counterbalance shafts module to bedplate | N20/N26 | M8x75/M8x40 | Jointing torque | 19 Nm |
| Angle of rotation | 90 ° | ||||
| 3AZ | Chain module to crankcase and oil pump | N20/N26 | M6x30 | 10 Nm | |
| 4AZ | Hydraulic valve of oil pump to crankcase | N20/N26 | M6x14 | 10 Nm | |
| 5AZ | Camshaft sprocket to counterbalance shaft | N20/N26 | M10x30 | Replace screw | |
| Jointing torque | 20 Nm | ||||
| Torque | 95 Nm | ||||
| 6AZ | Counterbalance shafts module to bedplate | N20/N26 | M6x25 | 10 Nm | |
| 7AZ | Oil pump to counterbalance shaft housing | N20/N26 | M6x70 | 10 Nm | |