LEMON Manuals: Even more car manuals for everyone
Home >> Mini >> 2010 >> Cooper S, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Air Bag Restraint Systems) >> Removal & Installation >> Emergency TENSIONING Retractor (ETR) Seat Belt >> Removal & Installation

Removal & Installation

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2000 BMW Z3, 2000 BMW 328i, 2000 BMW 323i, 1999 BMW Z3, and 1999 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
  1. Before proceeding, follow air bag service precautions. See AIR BAG SAFETY PRECAUTIONS  . Disable air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  .
  2. Remove front seat and B-pillar trim. Open cable strap for plug on seat belt pretensioner. Disconnect electrical connector from seat belt pretensioner. Remove seat belt pretensioner bolt. Note position of seat belt pretensioner on seat. Remove seat belt pretensioners.
  3. To install, reverse removal procedure. Replace micro encapsulated seat belt pretensioners bolt and cable strap. Tighten seat belt pretensioners bolt to specification. See TORQUE SPECIFICATIONS  . Activate air bag system. Perform system operation check to ensure system is functioning properly. See SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals