51 75 030 Removing or installing/replacing the sound insulation of the upper part of the bulkhead
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Necessary preliminary tasks:
Detach positive wire from sealing (2).
Release expansion rivet (1).
Unclip sealing (2) in direction of arrow.
Release screws (1).
Feed out sound insulation of upper part of bulkhead (2).
Installation note:
The gasket at the bottom of the sound insulation of the upper part of the bulkhead (2) must not be damaged.