51 16 158 Removing and installing/replacing side cover on center console
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Special tools required:
When working on trim panel components, make sure that visible surfaces are not scratched or damaged (e.g. by sharp-edged tools).
Necessary preliminary tasks:
Release cover (1) with special tool 00 9 325 from clamps (2 and 3).
Remove cover (1) inwards.
Installation note:
Replace faulty clamps (2 and 3).
Fixtures for clamps (2 and 3) on cover (1) must not be missing or damaged.