51 47 490 Removing and installing/replacing front underbody protection

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Illustration only an example. Detail deviations (depending on engine version) are possible.

Release screws (1).

Tightening torque: 51 75 1AZ .

Release all screws along line (2).

Tightening torque: 51 75 1AZ .

Remove underbody protection (3).

Fig 1: Underbody Protection Screws

Courtesy of BMW OF NORTH AMERICA, INC.