61 31 132 Removing and installing/replacing the shift paddles for the transmission (M sports steering wheel)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2016 BMW 328i xDrive, 2016 BMW 328d xDrive, 2015 BMW 328i xDrive, 2015 BMW 328d xDrive, and 2014 BMW 328i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Necessary preliminary tasks:

Remove AIRBAG UNIT

Release screws (1) on steering wheel.

Release screw (2) on rear side of steering wheel.

Remove design cover.

Fig 1: Identifying Steering Wheel Screws

G09877424

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Steering wheel is shown removed for purposes of clarity.

Release the screws (1) and feed out the wiring harness (2).

Fig 2: Identifying Wiring Harness, Plug Connection And Screws

G09928827

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: Steering wheel is shown removed for purposes of clarity.

Pull the steering wheel module (2) out of the steering wheel.

Release the plug connections (1, 3) from the steering wheel and disconnect.

Installation note:

Fig 3: Steering Wheel Module And Plug Connections

G09928874

Courtesy of BMW OF NORTH AMERICA, INC.

Make sure electrical wiring is correctly routed.

Make sure the plug connections (1, 3) are correctly seated.

Ensure that the steering wheel module (2) is correctly seated.

NOTE: Steering wheel is shown removed for purposes of clarity.

Feed out the cable though the steering wheel spokes (1) and take off the shift paddles.

Installation note:

Make sure electrical wiring is correctly routed.

Ensure that the shift paddles are correctly seated.

Fig 4: Identifying Shift Paddles And Screws

G09928828

Courtesy of BMW OF NORTH AMERICA, INC.